HB288448A5 Overview
This card plies with PC card ATA standard and is suitable for the usage of data storage memory medium for PC or any other electric equipment. This card is equipped with Hitachi 256 Mega bit Flash memory. This card is suitable for ISA (Industry Standard Architecture) bus interface standard , and read/write unit is 1 sector (512 bytes) sequential access.
HB288448A5 Key Features
- PC card ATA standard specification 68 pin two pieces connector and Type II (5 mm)
- 3.3 V/5 V single power supply operation
- ISA standard and Read/Write unit is 512 bytes (sector) sequential access Sector Read/Write transfer rate: 8MB/sec burs
- Card density is 800 Mega bytes maximum This card is equipped Hitachi 256 Mega bit Flash memory
- 3 variations of mode access Memory card mode I/O card mode True IDE mode
- Internal self-diagnostic program operates at VCC power on
- High reliability based on internal ECC (Error Correcting Code) function
- Data write is 300,000 cycles
- Data reliability is 1 error in 10 -14 bits read
- Auto Sleep Function